Manufacture:
T-Grip™ Sheets are manufactured under heat and pressure to form a highly dense extruded sheet of great smoothness.
The surface will not permit the adhesion of slimes or algaes and the sheet is easily cleaned and decontaminated at all times.
The resin from which the T-Grip™ is made is thermoplastic and therefore repairable at any point in time over the lifetime of the sheet.
Weldability:
T-Grip™ can be welded by many different methods, including Hot Air, Extrusion and by hot wedge. The typical value of a hot air weld, carried out by a good field welder is 10 Mpa..
 |
 |
 |
Construction Methods:
T-Grip™ sheets are placed in pipe or structural Forms and attached by mechanical means to ensure that they will maintain a fixed position during the pouring of concrete. With the T-Rib or ‘wet side’ always contacting the concrete or mortar or grout, care should be taken in the concrete delivery and consequent vibration of the same, in order to ensure that the concrete has fully flowed around the projecting T-Ribs, prior to setting. Our detailed specifications and Method Statements (that form a part of this presentation) describe the type of tools and fixings that are best used in the construction of T-Grip™ Lined structures and pipes etc.
 |
 |
 |